ISSI’s LPDDR4 and LPDDR4X are low-voltage memory devices available in 2 Gb, 4 Gb, and 8 Gb densities. The devices are organized as 1/2 channels per device and each channel is eight banks and 16-bits. The LPDDR4 and LPDDR4X use a double-data-rate architecture to achieve high-speed operation. 

Prototype your T1L solutions quickly with the new ultra-low-power COM-19038 MicroMod single-pair Ethernet function board. This board was developed by SparkFun Electronics in collaboration with Analog Devices, Harting, and Würth Elektronik.

Hirose's BM23 FPC-to-board connectors are available in 2 types, "FR" signal contacts and "PF" hybrid signal/power contacts

Ohmite offers the KDV series of low-resistance chip resistors that is available in three standard sizes: 0603, 0805, and 1206. The KDV series is halogen and lead-free and provides long-term stability, high-precision current sensing, and high power capability.

The TMAG5170 linear 3D Hall effect position sensor from Texas Instruments allows engineers to achieve uncalibrated ultra-high precision at speeds up to 20 kSPS for faster, more accurate real-time control in automated industrial systems.

Hammond's 1590 series are available in a variety of colors, wall-mount configurations, and with water-tight gaskets. They also have lap joint construction providing protection from dust and improved EMI shielding. Assembly is easy with lid machine screws threaded in factory tapped holes on the box.

Amphenol Sine Systems’ PRM Series™ (Panel Rack Mount) Connectors, available in both Plugs and Receptacles, are a quick-connect power connector solution for use in panel rack mount network applications. Our quick-connect design enables denser installations, faster deployments and upgrades.

KEMET’s A700 & A720 Series have small package sizes, high ripple current capability, high operating temperature, low parasitics, and high capacitance making them ideal for high-performance microprocessor, FPGA, and ASIC decoupling designs.

Wolfspeed's Silicon Carbide (SiC) 650 V Schottky Diode technology is optimized for high-performance power electronics applications, including server power supplies, electric vehicle charging systems, energy storage systems, solar (PV) inverters, and consumer electronics.

Transformers change one AC voltage to another by magnetic induction. These heavy-duty transformers are used in a variety of applications, including HVAC, water pumps, pool and spa, food service, and electronics.

Molex's FiT family can offer a variety of connectors for complete design flexibility in a wide variety of applications, such as colored polarized housings with isolated terminals, TPAs, positive locks and tangless terminals.

These solutions combine ADI's precision amplifiers, voltage references, ADCs, DACs, circuit protection and isolation products, allowing system designers to build with confidence a solution that optimizes for their precision and speed requirements.

The cost effective SMD ECX-31B series 32.768 kHz tuning fork has an ESR 70kΩ in a 3.2 x 1.5 x 0.9 mm package that is ideal for mobile and wireless devices, RTCs, and microprocessors. The standard ECX-31B has ±20ppm tolerance at 25ºC; variations include extended temp. ranges and tight ±10 ppm tolerance.

Phoenix Contact's high inrush current relays with tungsten lead contacts allow higher maximum inrush currents of up to 800 A to be withstood. The specially alloyed contacts in these relays can withstand that inrush current long enough to get to the smaller steady-state load.

High speed capable: 10/100BT up to 1GBT Can be used in low profile applications 50 micro-inches of gold plated contacts as required by the TIA 1096/FCC 47, Part 68

Renesas RA2E2 entry line family of MCUs is based on the 48 MHz Arm Cortex-M23 core. With ultra-low power operation and high-speed serial communication, RA2E2 offers small package options of 20-pin and 24-pin QFN and 16-pin CSP to meet the needs of cost-sensitive and space-constrained systems.

The 6-finger contact design is beryllium copper and gold-plated to maintain electrical continuity under heavy shock and vibration and is available in a compact single-row package in cable-to-board configurations.

Murata's MYC0409 series Charge Pump (called UltraCP™) module provides up to 74W of output power. It can achieve up to 96.5% efficiency in a 11.5 mm x 9.5 mm x 2.0 mm LGA package and has a fixed divide-by-4 conversion ratio from input to output voltage, with an input voltage range of 20V to 60V.

The LN series of panel mounted solid state relays from Sensata Crydom offer reliable back-to-back SCR switching of up to 75 A at 528 VAC. Their innovative design allows for resistive loads to be switched dependably with market-leading performance and minimal electromagnetic noise generated.