Refine Search
Filter Options Stacked Scrolling
Eval Board
Port Role
Voltage In
Voltage Out
Port Current
Power Out
Features
No-load Input Power @ Voltage
Compliance
Efficiency @ Conditions
Component Count + Extras
Design Author
More Filters

Designs (5)

5 Results - Page 1/1
Schematic View Design
Power Management > USB Power Delivery STEVAL-ISC005V1: Stand Alone USB PD Sink Port Controller Manufacturer: STMicroelectronics

The STEVAL-ISC005V1 evaluation board is a ready-to-use, stand alone USB PD sink based on STUSB4500. It handles the USB PD negotiation with a source to enable one or more charging paths.

Schematic View Design
Power Management > USB Power Delivery TPS25810EVM-745: USB Type-C DFP Controller and Power Switch with Load Detection Manufacturer: Texas Instruments

The Texas Instruments TPS25810EVM-745 evaluation module (EVM) helps designers evaluate the performance of the TPS25810 USB Type-C DFP Controller and Power Switch. The EVM contains inputs and outputs for the device as well as many test points and jumpers for easy configuration and evaluation of the TPS25810 features.

Schematic View Design
Power Management > USB Power Delivery SLRDK1001A: USB Type-C High-Power 60W Source Manufacturer: Silicon Labs

The USB Type-C High Power 60W Charger Reference Design adds high power Type-C capabilities to designs. The design negotiates as a source/DFP for up to 60W through the USB Type-C receptacle.

Schematic View Design
Power Management > USB Power Delivery RDK-848: 42W Total, 5V @ 2.4A and 5 ~ 20V @ 3 ~ 1.5A, 90 ~ 265VAC Manufacturer: Power Integrations

The RDK-848 evaluation board is a, 42W, Dual Poart isolated Flyback power supply adapter. USB Type-C with USB Power Delivery 3.0 and USB Type-A with Standard USB Charging up to 2.4A at 5V.

Schematic View Design
Power Management > USB Power Delivery STEVAL-SMACH15V1: 15W, 5V @ 3A, USB PD Adapter Manufacturer: STMicroelectronics

The STEVAL-SMACH15V1 USB adapter evaluation board is based on the STCH03 offline PWM controller for low power standby adapters. The 15W (5V @ 3A) wide range mains USB adapter evaluation board is based on the STCH03 current-mode quasi-resonant controller. The controller can provide constant output current (CC) regulation using primary sensing feedback.

5 Results - Page 1/1