MCDP5200 Single-Port Converter

Product Highlights > MCDP5200 Single-Port Converter

            MCDP5200 Single-Port Converter
                    Kinetic Technologies' MCDP5200 is a USB Type-C®/DP1.4a Alt-mode-to-HDMI2.0b protocol converter with USB retimer
    

Image of Kinetic Technologies' MCDP5200 Single-Port Converter Kinetic Technologies' MCDP5200 is an advanced USB Type-C/DisplayPort™ (DP) 1.4a to HDMI 2.0b protocol converter with an integrated USB Type-C de-multiplexer, targeted primarily for mobile notebook accessory and display applications. This device functions as a DP to HDMI protocol converter with an HDCP 1.x/HDCP 2.x repeater function.

The MCDP5200 has a DP alt-mode capable USB Type-C upstream facing port (UFP). The four high-speed lanes of UFP can receive DP 1.4a audio-video and USB 3.1 Gen2 data streams simultaneously. The flexible input lane mapping meets the USB Type-C connector flip orientation requirements. The incoming DP and USB signals are de-multiplexed, retimed, and transmitted on the downstream facing ports (DFP).

The MCDP5200 consists of a USB DFP port with USB 3.1 TX and RX pair and an audio-video DFP port configured as a DC coupled HDMI/DVI port, each with four high-speed lanes.

The combo receiver in MCDP5200 supports all DP standard data rates up to HBR3 (8.1 Gbps/lane) and USB 3.1 Gen1 (5.0 Gbps) and Gen2 (10.0 Gbps). The transmitter supports TMDS data format up to 6.0 Gbps/lane. The side-band channel uses 1.0 Mbps Manchester-coded AUX signaling for DP and DDC signaling up to 100 kbps for the HDMI interface.

The MCDP5200 translates a DP SST stream into a DC coupled HDMI 2.0b output in the protocol converter mode. The highest video timing supported in this mode is 4K2K60Hz RGB/YCC 444 or 4K2K120Hz in YCC 420 pixel format.

Features

Device configuration options

Application FW stored in SPI Flash
AUX CH, I²C host interface

Internal video pattern generator

Configurable through vendor-specific DPCD registers

EMI reduction support

Spread spectrum for DP input, output
Scrambler for DP and HDMI outputs

Low power operation

900 mW nominal operation with retimer
650 mW nominal operation without retimer
9.2 mW standby operation

Video processing

Color space conversion from RGB to YCC
Colorimetry support: BT2020, BT709, BT601, and Adobe RGB
Color bit depth expansion (10-bits to 12-bits)
16-bits per color pass through
DP to HDMI Stereoscopic 3D Transport

Frame sequential to stacked top-bottom conversion
Pass through of other 3D formats

Video horizontal blanking expansion
Pixel stream de-skewing
Adaptive sync video
Chroma down sampling

5-tap H and V FIR filters with programmable coefficients
12-bits per color input width
12-bits per color output width
YCbCr 444 to YCbCr 420 conversion
YCbCr 444 to YCbCr 422 conversion
YCbCr 422 to YCbCr 420 conversion
Pass through for YCbCr 444/422/420

Max video resolution and color depth on HDMI TX output

4K2K60Hz, RGB/YCbCr 444, 8 bpc
4K2K60Hz, YCbCr 420, up to 16 bpc
4K2K30Hz, RGB/YCbCr 444, up to 16 bpc

HDCP support

HDCP1.3 to HDCP1.4 repeater function
DCP compliant: HDCP2.x to HDCP1.4
HDCP2.x to HDCP2.x repeater function
Read-protected embedded HDCP keys

Enhanced security

Encrypted on-chip key storage
RSA-2048-bit signed application firmware
Secure boot
Secure in-system-programming
Test, debug ports deactivation

Arm® processor and peripheral controllers

Arm Cortex®-M3 core
SPI controller
I²C primary, secondary controller
On-chip, RAM, ROM, OTP

ESD specification

ESD: ±2 kV HBM, 250 V CDM

Package

TFBGA-169, 7.0 mm x 7.0 mm x 1.2 mm
Halogen-free and RoHS and green compliant

Power supply voltages

1.8 V I/O, 0.95 V core

Applications

Notebooks
Tablet accessories

Adapters (dongles)
Docking stations
AV accessories

Enabling USB Type-C DP alternative mode for inside-the-box applications
TVs
Signage
Game consoles