STEVAL-IOD002V1 Dual-Channel IO-Link Device Expansion Board

Product Highlights > STEVAL-IOD002V1 Dual-Channel IO-Link Device Expansion Board

            STEVAL-IOD002V1 Dual-Channel IO-Link Device Expansion Board
                    STMicroelectronics' board is inexpensive and easy-to-use and helps developers build sensor applications
    

Image of STMicroelectronics STEVAL-IOD002V1 Dual Channel IO-Link Device Expansion Board STMicroelectronics' STEVAL-IOD002V1 board is affordable and easy to use. It helps developers build sensor applications around the L6364W dual-channel SIO and IO-Link PHY device transceiver, with advanced communication features, 50 mA 3.3 V and 5.0 V voltage regulators, a DC-DC converter, and M-sequence management.

Communication via IO-Link can be performed in either multibyte or single byte modes with SPI control of IC configuration and bidirectional sensor data transmission, or transparent mode with SPI control of IC configuration and UART interfacing for bidirectional sensor data transmission.

The STEVAL-IOD002V1 communicates with an STM32 microcontroller via SPI and GPIO pins and is compatible with the Arduino UNO R3 and ST morpho.

Features

5 V to 35 V operating voltage range
2-channel (CQ and DIO) IO-Link PHY layer
IO-Link DLL (M-sequence handler and checksum)
Wake-up detection
Interrupt diagnostic pin
SPI and UART interfaces
50 mA 3.3 V and 5.0 V linear regulators
50 mA adjustable (5.0 V to 10.8 V) buck converter
Overload and overheating protections with adjustable thresholds
Status diagnostics LEDs

Full reverse polarity on process side
Ground and V_CC wire break protections
Radiated emissions (EM fields 30 MHz to 1 GHz) <40 dB µV/m
Immunity to conducted disturbance, RF EM fields, SURGE pulse, ESD contact/air, BURST noise
Compatible with STM32 Nucleo development boards
Equipped with Arduino UNO R3 connectors
RoHS and WEEE compliant