EPC9051: 1A, 0 ~ 40V, 15MHz, Class E Amplifier

Summary

The EPC9051 is a high efficiency, differential mode class-E amplifier demonstration board that can operate up to 15 MHz.

This board may also be used for applications where a low side switch is utilized. Examples include, and are not limited to, push-pull converters, current-mode Class D amplifiers, common source bi-directional switch, and generic high voltage narrow pulse width applications such as LiDAR.

The amplifier board features the 100 V rated EPC2037 eGaN FET. The amplifier is set to operate in differential mode and can be re-configured to operate in single-ended mode. The key feature of this amplifier is that it does not require a gate driver for the eGaN FETs and is driven directly from the logic gates provided. A separate logic supply regulator has also been provided on the board. GaN

Specifications

Manufacturer	EPC
Category	Power Management
Sub-Category	Power Output Stages (H-Bridge, Half Bridge)
Eval Board Part Number	917-1104-ND
Eval Board Supplier	EPC
Eval Board	Board not Stocked
Configuration	Class E amplifier
Voltage Out Range	0 ~ 40 V
Current Out	1 A
Interface	Parallel Logic
Features	Shoot Through Protection
Switching Frequency (Max)	15 MHz
Component Count + Extras	24 + 4
Design Author	EPC
Main I.C. Base Part	EPC2037
Date Created By Author	2015-09
Date Added To Library	2018-08