MCC Capacitor Reliability Data Datasheet by Taiyo Yuden

TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and

High Reliability Application Multilayer Ceramic Capacitors are noted separately.

Multilayer Ceramic Capacitors

■RELIABILITY DATA

1.Operating Temperature Range

Specified

Value

Temperature

Compensating（Class1）

Standard －55 to ＋125℃

High Frequency Type

High Permittivity （Class2）

Specification Temperature Range

BJ B －25 to ＋85℃

X5R －55 to ＋85℃

B7 X7R －55 to ＋125℃

C6 X6S －55 to ＋105℃

C7 X7S －55 to ＋125℃

LD(※) X5R －55 to ＋85℃

Note: ※LD Low distortion high value multilayer ceramic capacitor

2. Storage Conditions

Specified

Value

Temperature

Compensating（Class1）

Standard －55 to ＋125℃

High Frequency Type

High Permittivity （Class2）

Specification Temperature Range

BJ B －25 to ＋85℃

X5R －55 to ＋85℃

B7 X7R －55 to ＋125℃

C6 X6S －55 to ＋105℃

C7 X7S －55 to ＋125℃

LD(※) X5R －55 to ＋85℃

Note: ※LD Low distortion high value multilayer ceramic capacitor

3. Rated Voltage

Specified

Value

Temperature

Compensating（Class1）

Standard 50VDC, 25VDC, 16VDC

High Frequency Type 50VDC, 25VDC, 16VDC

High Permittivity （Class2） 50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC

4. Withstanding Voltage （Between terminals）

Specified

Value

Temperature

Compensating（Class1）

Standard

No breakdown or damage

High Frequency Type

High Permittivity （Class2）

Test

Methods and

Remarks

Class 1 Class 2

Applied voltage Rated voltage×3 Rated voltage×2.5

Duration 1 to 5 sec.

Charge/discharge current 50mA max.

5. Insulation Resistance

Specified

Value

Temperature

Compensating（Class1）

Standard 10000 MΩ min.

High Frequency Type

High Permittivity （Class2） Note 1 C≦0.047μF : 10000 MΩ min.

C＞0.047μF : 500MΩ・μF

Test

Methods and

Remarks

Applied voltage : Rated voltage

Duration : 60±5 sec.

Charge/discharge current : 50mA max.

TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

6. Capacitance （Tolerance）

Specified

Value

Temperature

Compensating（Class1）

Standard

C□

U□

SL

0.2pF≦C≦5pF : ±0.25pF

0.2pF≦C≦10pF : ±0.5pF

C＞10pF : ±5% or ±10%

High Frequency Type CG 0.2pF≦C≦2pF : ±0.1pF

C＞2pF : ±5%

High Permittivity （Class2） ±10% or ±20%

Test

Methods and

Remarks

Class 1 Class 2

Standard High Frequency Type C≦10μF C＞10μF

Preconditioning None Thermal treatment （at 150℃ for 1hr） Note 2

Measuring frequency 1ＭHz±10% 1kHz±10% 120±10Hz

Measuring voltage Nte 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms

Bias application None

7. Q or Dissipation Factor

Specified

Value

Temperature

Compensating（Class1）

Standard C＜30pF : Q≧400＋20C

C≧30pF : Q≧1000 （C：Nominal capacitance）

High Frequency Type Refer to detailed specification

High Permittivity （Class2） Note 1 BJ, B7, C6, C7：2.5% max.

Test

Methods and

Remarks

Class 1 Class 2

Standard High Frequency Type C≦10μF C＞10μF

Preconditioning None Thermal treatment （at 150℃ for 1hr） Note 2

Measuring frequency 1ＭHz±10% 1GHz 1ｋHz±10% 120±10Hz

Measuring voltage Note 1 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms

Bias application None

High Frequency Type

Measuring equipment : HP4291A

Measuring jig : HP16192A

8. Temperature Characteristic （Without voltage application）

Specified

Value

Temperature

Compensating（Class1）

Standard

Temperature Characteristic ［ppm/℃］ Tolerance ［ppm/℃］

C□ : 0 CG G : ±30

U□ : －750 UJ, UK J：±120

K：±250

SL : ＋350 to －1000

High Frequency Type Temperature Characteristic ［ppm/℃］ Tolerance ［ppm/℃］

C□ : 0 CG G : ±30

High Permittivity （Class2）

Specification Capacitance

change

Reference

temperature Temperature Range

BJ B ±10% 20℃ －25 to ＋85℃

X5R ±15% 25℃ －55 to ＋85℃

B7 X7R ±15% 25℃ －55 to ＋125℃

C6 XS ±22% 25℃ －55 to ＋105℃

C7 X7S ±22% 25℃ －55 to ＋125℃

LD(※) X5R ±15% 25℃ －55 to ＋85℃

Note : ※LD Low distortion high value multilayer ceramic capacitor

Test

Methods and

Remarks

Class 1

Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the

following equation.

（C85－C20） ×106（ppm/℃）

C20×△T △T＝65

Class 2

Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following

equation.

Step B X5R、X7R、X6S、X7S

1 Minimum operating temperature

2 20℃ 25℃

3 Maximum operating temperature

（C－C2） ×100（%） C ：Capacitance in Step 1 or Step 3

C2 ：Capacitance in Step 2

C2

m E! (Um! mm) R05 Pvesswngiwg I:I ml m, ~A ‘ w. A “A? Hooked jig If Board cm ’3 [Chm TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

9. Deflection

Specified

Value

Temperature

Compensating（Class1）

Standard Appearance : No abnormality

Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.

High Frequency Type Appearance : No abnormality

Capacitance change : Within±0.5 pF

High Permittivity （Class2） Appearance : No abnormality

Capacitance change : Within ±12.5%

Test

Methods and

Remarks

Multilayer Ceramic Capacitors

021, 042, 063, ※105 Type The other types

Board Glass epoxy-resin substrate

Thickness 0.8mm 1.6mm

Warp 1mm

Duration 10 sec.

※105 Type thickness, C： 0.2mm ,P： 0.3mm.

Capacitance measurement shall be conducted

with the board bent

10. Body Strength

Specified

Value

Temperature

Compensating（Class1）

Standard －

High Frequency Type No mechanical damage.

High Permittivity （Class2）－

Test

Methods and

Remarks

High Frequency 105Type

Applied force : 5N

Duraton : 10 sec.

11. Adhesive Strength of Terminal Electrodes

Specified

Value

Temperature

Compensating（Class1）

Standard

No terminal separation or its indication.

High Frequency Type

High Permittivity （Class2）

Test

Methods and

Remarks

Multilayer Ceramic Capacitors

021, 042, 063 Type 105 Type or more

Applied force 2N 5N

Duration 30±5 sec.

12. Solderability

Specified

Value

Temperature

Compensating（Class1）

Standard

At least 95% of terminal electrode is covered by new solder.

High Frequency Type

High Permittivity （Class2）

Test

Methods and

Remarks

Eutectic solder Lead-free solder

Solder type H60A or H63A Sn-3.0Ag-0.5Cu

Solder temperature 230±5℃ 245±3℃

Duration 4±1 sec.

TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

13. Resistance to Soldering

Specified

Value

Temperature

Compensating（Class1）

Standard

Appearance : No abnormality

Capacitance change : Within ±2.5% or ±0.25pF, whichever is larger.

Q : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals） : No abnormality

High Frequency Type

Appearance : No abnormality

Capacitance change : Within ±2.5%

Q : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals） : No abnormality

High Permittivity （Class2） Note 1

Appearance : No abnormality

Capacitance change : Within ±7.5%

Dissipation factor : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals）: No abnormality

Test

Methods and

Remarks

Class 1

021, 042, 063 Type 105 Type

Preconditioning None

Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min.

150 to 200℃, 2 to 5 min.

Solder temp. 270±5℃

Duration 3±0.5 sec.

Recovery 6 to 24 hrs （Standard condition） Note 5

Class 2

021, 042、063 Type 105, 107, 212 Type 316, 325, 432 Type

Preconditioning Thermal treatment （at 150℃ for 1 hr） Note 2

Preheating 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min.

150 to 200℃, 2 to 5 min.

80 to 100℃, 5 to 10 min.

150 to 200℃, 5 to 10 min.

Solder temp. 270±5℃

Duration 3±0.5 sec.

Recovery 24±2 hrs （Standard condition） Note 5

14. Temperature Cycle (Thermal Shock）

Specified

Value

Temperature

Compensating（Class1）

Standard

Appearance : No abnormality

Capacitance change : Within ±2.5% or ±0.25pF, whichever is larger.

Q : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals） : No abnormality

High Frequency Type

Appearance : No abnormality

Capacitance change : Within ±0.25pF

Q : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals） : No abnormality

High Permittivity （Class2） Note 1

Appearance : No abnormality

Capacitance change : Within ±7.5%

Dissipation factor : Initial value

Insulation resistance : Initial value

Withstanding voltage （between terminals） : No abnormality

Test

Methods and

Remarks

Class 1 Class 2

Preconditioning None Thermal treatment （at 150℃ for 1 hr）

Note 2

1 cycle

Step Temperature（℃） Time（min.）

1 Minimum operating temperature 30±3

2 Normal temperature 2 to 3

3 Maximum operating temperature 30±3

4 Normal temperature 2 to 3

Number of cycles 5 times

Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs （Standard condition） Note 5

TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

15. Humidity （Steady State）

Specified

Value

Temperature

Compensating（Class1）

Standard

Appearance : No abnormality

Capacitance change : Within ±5% or ±0.5pF, whichever is larger.

Q : C＜10pF : Q≧200＋10C

10≦C＜30pF : Q≧275＋2.5C

C≧30pF:Q≧350（C：Nominal capacitance）

Insulation resistance : 1000 MΩ min.

High Frequency Type

Appearance : No abnormality

Capacitance change : Within ±0.5pF,

Insulation resistance : 1000 MΩ min.

High Permittivity （Class2） Note 1

Appearance : No abnormality

Capacitance change : Within ±12.5%

Dissipation factor : 5.0% max.

Insulation resistance : 50 MΩμF or 1000 MΩ whichever is smaller.

Test

Methods and

Remarks

Class 1 Class 2

Standard High Frequency Type All items

Preconditioning None Thermal treatment（ at 150℃ for 1 hr） Note 2

Temperature 40±2℃ 60±2℃ 40±2℃

Humidity 90 to 95%RH 90 to 95%RH

Duration 500＋24/－0 hrs 500＋24/－0 hrs

Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs （Standard condition） Note 5

16. Humidity Loading

Specified

Value

Temperature

Compensating（Class1）

Standard

Appearance : No abnormality

Capacitance change : Within ±7.5% or ±0.75pF, whichever is larger.

Q : C＜30pF：Q≧100＋10C/3

C≧30pF：Q≧200 （C：Nominal capacitance）

Insulation resistance : 500 MΩ min.

High Frequency Type

Appearance : No abnormality

Capacitance change : C≦2pF：Within ±0.4 pF

C＞2pF：Within ±0.75 pF

（C：Nominal capacitance）

Insulation resistance : 500 MΩ min.

High Permittivity （Class2） Note 1

Appearance : No abnormality

Capacitance change : Within ±12.5%

Dissipation factor : 5.0% max.

Insulation resistance : 25 MΩμF or 500 MΩ, whichever is smaller.

Test

Methods and

Remarks

Class 1 Class 2

Standard High Frequency Type All items

Preconditioning None Voltage treatment

（Rated voltage are applied for 1 hour at 40℃） Note 3

Temperature 40±2℃ 60±2℃ 40±2℃

Humidity 90 to 95%RH 90 to 95%RH

Duration 500＋24/－0 hrs 500＋24/－0 hrs

Applied voltage Rated voltage Rated voltage

Charge/discharge

current 50mA max. 50mA max.

Recovery 6 to 24 hrs （Standard condition） Note 5 24±2 hrs（Standard condition） Note 5

TAIYO YUDEN

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

c_mlcc_reli_e-E06R01

17. High Temperature Loading

Specified

Value

Temperature

Compensating（Class1）

Standard

Appearance : No abnormality

Capacitance change : Within ±3% or ±0.3pF, whichever is larger.

Q : C＜10pF： Q≧200＋10C

10≦C＜30pF：Q≧275＋2.5C

C≧30pF： Q≧350（C：Nominal capacitance）

Insulation resistance : 1000 MΩ min.

High Frequency Type

Appearance : No abnormality

Capacitance change : Within ±3% or ±0.3pF, whichever is larger.

Insulation resistance : 1000 MΩ min.

High Permittivity （Class2） Note 1

Appearance : No abnormality

Capacitance change : Within ±12.5%

Dissipation factor : 5.0% max.

Insulation resistance : 50 MΩμF or 1000 MΩ, whichever is smaller.

Test

Methods and

Remarks

Class 1 Class 2

Standard High Frequency Type BJ, LD(※) C6 B7, C7

Preconditioning None Voltage treatment（Twice the rated voltage shall be applied for

1 hour at 85℃, 105℃ or 125℃） Note 3, 4

Temperature Maximum operating temperature Maximum operating temperature

Duration 1000＋48/－0 hrs 1000＋48/－0 hrs

Applied voltage Rated voltage×2 Note 4 Rated voltage×2 Note 4

Charge/discharge

current 50mA max. 50mA max.

Recovery 6 to 24hr （Standard condition） Note 5 24±2 hrs （Standard condition） Note 5

Note: ※LD Low distortion high value multilayer ceramic capacitor

Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.

Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for

24±2hours.

Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in

the test conditions, and kept at room temperature for 24±2hours.

Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.

Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning

measurement results, in order to provide correlation data, the test shall be conducted under the following condition.

Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the

"standard condition".

MCC Capacitor Reliability Data Datasheet by Taiyo Yuden

Products related to this Datasheet