Factoryline Switches w/ Standard Functions Datasheet by Phoenix Contact

1 www.ghoenixconlacl.neI/calalog I0-00--0-00- [ﬂEEﬁr'A'c’E 0-1 INSPIRING INNOVATIONS

3087_en_A

FL SWITCH SF…

Data sheet

1Description

The FL SWITCH SF… range of Factoryline switches with

standard functions in numerous versions can be used for

quick and cost-effective Ethernet network expansion. The

switches have 8 or 16 ports, up to two of which are multi-

mode glass fiber ports provided in the SC or ST format. The

twisted pair ports of the switches support both Ethernet with

a transmission speed of 10 Mbps and fast Ethernet with a

transmission speed of 100 Mbps. The glass fiber ports only

support 100 Mbps.

The switches regenerate received data telegrams and send

them to the port to which the device is connected with the

corresponding target address.

2 Features and fields of application

– Increased network performance by filtering the data

traffic.

– Local data traffic remains local.

– The data volume in the network segments is

reduced.

– Easy network expansion without configuration of the

switch.

– Coupling copper network segments with different bit

rates.

– Automatic detection of the data transmission speed

of 10 or 100 Mbps.

– Auto negotiation: Each copper port establishes a half or

full duplex connection with 10 or 100 Mbps.

– Auto crossing: It is not necessary to make a distinction

between 1:1 or crossover Ethernet copper cables.

– Electrical isolation of network segments using up to two

fiber optic ports.

– Increasing the maximum cable length to 10,000 m

(62.5/125 µm) or to 6400 m (50/125 µm) using a fiber

optic port.

– Floating alarm output: The alarm output can be used to

monitor the redundant voltage supply.

Please note the different connection directions of the transmission media: Copper cables are connected at the

front, glass fiber cables at the bottom.

Make sure you always use the latest documentation.

It can be downloaded at www.phoenixcontact.net/catalog.

This data sheet is valid for all products listed on the following page:

Factoryline switches with standard functions

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 2

3Ordering data

Products

Description Type Order No. Pcs. / Pkt.

Ethernet switch with 8 RJ45 ports FL SWITCH SF 8TX 2832771 1

Ethernet switch with 7 RJ45 ports and

1 fiber optic port in SC format

FL SWITCH SF 7TX/FX 2832726 1

Ethernet switch with 6 RJ45 ports and

2 fiber optic ports in SC format

FL SWITCH SF 6TX/2FX 2832933 1

Ethernet switch with 16 RJ-45 ports FL SWITCH SF 16TX 2832849 1

Ethernet switch with 15 RJ45 ports and

1 fiber optic port in SC format

FL SWITCH SF 15TX/FX 2832661 1

Ethernet switch with 14 RJ45 ports and

2 fiber optic ports in SC format

FL SWITCH SF 14TX/2FX 2832593 1

Ethernet switch with 7 RJ45 ports and

1 fiber optic port in ST format

FL SWITCH SF 7TX/FX ST 2832577 1

Ethernet switch with 6 RJ45 ports and

2 fiber optic ports in ST format

FL SWITCH SF 6TX/2FX ST 2832674 1

Accessories

Description Type Order No. Pcs. / Pkt.

Rail adapter for mounting the 8-port switch

at an angle of 90°

FL RA SF8 2832519 1

Universal end clamp E/NS 35 N 0800886 50

RJ45 connector set; gray for 1:1 cables (pack of 2) FL PLUG RJ45 GR/2 2744856 1

RJ45 connector set; green for crossover cables (pack of 2) FL PLUG RJ45 GN/2 2744571 1

Double sheathed Ethernet cable FL CAT5 HEAVY 2744814 -

Flexible Ethernet cable FL CAT5 FLEX 2744830 -

Assembly tool for RJ45 connector FL CRIMPTOOL 2744869 1

Patchbox 8 x RJ45 CAT5e, pre-assembled, can be retrofitted FL PBX 8TX 2832496 1

Patchbox 6 x RJ45 CAT5e and 4 SC-RJ, glass pre-assembled, can be

retrofitted

FL PBX 6TX/4FX 2832506 1

Patch cable, CAT 5, pre-assembled, 0.3 m long FL CAT5 PATCH 0,3 2832250 10

Patch cable, CAT 5, pre-assembled, 0.5 m long FL CAT5 PATCH 0,5 2832263 10

Patch cable, CAT 5, pre-assembled, 1.0 m long FL CAT5 PATCH 1,0 2832276 10

Patch cable, CAT 5, pre-assembled, 1.5 m long FL CAT5 PATCH 1,5 2832221 10

Patch cable, CAT 5, pre-assembled, 2.0 m long FL CAT5 PATCH 2,0 2832289 10

Patch cable, CAT 5, pre-assembled, 3.0 m long FL CAT5 PATCH 3,0 2832292 10

Patch cable, CAT 5, pre-assembled, 5.0 m long FL CAT5 PATCH 5,0 2832580 10

Patch cable, CAT 5, pre-assembled, 7.5 m long FL CAT5 PATCH 7,5 2832616 10

Patch cable, CAT 5, pre-assembled, 10.0 m long FL CAT5 PATCH 10 2832629 10

Dust protection caps for RJ45 sockets FL RJ45 PROTECT CAP 2832991 10

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 3

4 Technical data

General data

Function Switch/repeater; conforms to standard IEEE 802.3

Latency of the communication processor 6 µs plus frame time (16-port version)

8 µs plus frame time (8-port version)

Housing dimensions (width x height x depth) in mm

8-port switch (RJ45) 135 x 80 x 30 (without COMBICON)

135 x 94 x 30 (with COMBICON)

8-port switch (fiber optics) 135 x 89 x 30 (without COMBICON)

135 x 103 x 30 (with COMBICON)

16-port switch (RJ45) 200 x 80 x 30 (without COMBICON)

200 x 94 x 30 (with COMBICON)

16-port switch (fiber optics) 200 x 80 x 30 (without COMBICON)

200 x 103 x 30 (with COMBICON)

Permissible operating temperature 0°C to 55°C

Permitted storage temperature -20°C to 70°C

Degree of protection IP20, DIN 40050, IEC 60529

Class of protection Class 3 VDE 0106; IEC 60536

Humidity (operation) 5% to 95%, no condensation

Humidity (storage) 5% to 95%, no condensation

Air pressure (operation) 86 kPa to 108 kPa, 1500 m above sea level

Air pressure (storage) 66 kPa to 108 kPa, 3500 m above sea level

Preferred mounting position Perpendicular to a standard DIN rail

Connection to protective earth ground Snapped onto a grounded DIN rail

Weight

8-port switch 260 g, typical

16-port switch 380 g, typical

Supply voltage (US)

Connection Via COMBICON;

conductor cross-section 2.5 mm2, maximum

Nominal value 24 V DC

Permissible ripple 3.6 Vpp within the permissible voltage range

Permissible voltage range 18.5 V DC to 30.2 V DC

Current consumption at US Depends on the device - see the following table

Inrush current 9 A

Protection against polarity reversal None

Test voltage 500 V DC for 1 minute

Power consumption Depends on the device - see the following table

Module Current consumption Power consumption

FL SWITCH SF 8TX 200 mA 4.8 W

FL SWITCH SF 7TX/FX (ST) 220 mA 5.28 W

FL SWITCH SF 6TX/2FX (ST) 240 mA 5.76 W

FL SWITCH SF 16TX 300 mA 7.2 W

FL SWITCH SF 15TX/FX 330 mA 7.92 W

FL SWITCH SF 14TX/2FX 360 mA 8.64 W

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 4

Interfaces

Total number of Ethernet interfaces 8/16

Properties of RJ45 ports

Number 6, 7, 8, 14, 15 or 16 depending on the device version

Connection format 8-pos. RJ45 socket on the switch

Connection medium Twisted pair cable with a conductor cross-section of 0.14 mm² to 0.22 mm²

Cable impedance 100 

Transmission speed 10/100 Mbps

Maximum network segment expansion 100 m

Properties of fiber optic ports

Number 0, 1 or 2 depending on the device version

Connection format SC duplex socket or ST socket on the switch

Wavelength 1300 nm

Laser protection Class 1 according to DIN EN 60825-1:2001-11

Minimum transmission length, including 3 dB system reserve 6.4 km glass fiber with F-G 50/125 0.7 dB/km F1200

2.8 km glass fiber with F-G 50/125 1.6 dB/km F800

10 km glass fiber with F-G 62.5/125 0.7 dB/km F1000

3 km glass fiber with F-G 62.5/125 2.6 dB/km F600

Dynamic (average) transmission power (fiber type) in link mode

Minimum

Maximum

-24 dBm (50/125 µm) / -19 dBm (62.5/125 µm)

-14 dBm (50/125 µm) / -14 dBm (62.5/125 µm)

Minimum receiver responsiveness -32 dBm (dynamic)

Maximum overrange -14 dBm (dynamic)

Transmission speed 100 Mbps

Alarm contact

Voltage 24 V DC, typical

Current carrying capacity 100 mA, typical

Mechanical tests

Shock test according to IEC 60068-2-27 Operation: 25g, 11 ms period, half-sine shock pulse

Storage/transport: 50g, 11 ms period, half-sine shock pulse

Vibration resistance according to IEC 60068-2-6 Operation/storage/transport: 5g, 150 Hz, criterion 3

Free fall according to IEC 60068-2-32 1 m

Conformance with EMC directives

Developed according to IEC 61000-6-2

IEC 61000-4-2 (ESD) Criterion B

IEC 61000-4-3 (radiated-noise immunity) Criterion A

IEC 61000-4-4 (burst) Criterion A

IEC 61000-4-5 (surge) Criterion B

IEC 61000-4-6 (conducted noise immunity) Criterion A

IEC 61000-4-8 (noise immunity against magnetic fields) Criterion A

EN 55022 (noise emission) Class A

Approvals

U Class I, Div. 2 E199827

uE140324

ROHS EEE 2002/95/EC, WEEE 2002/96/EC

30 mm (1.181 In.) F t (11! Lss=o) mm n W“ ('UI osL'c) mm 09 m ‘ 135 mm (5.315 in.) 200 mm (7.874 in.) w 2 7 3 §§mms§§§ ‘ 3 V.,...u.......1,%. '3 o A U U LL 0 '01 w w a (II a o o 11 F o S .. mug o A LL 0 5' Iuvmnnuuvmn o o 3 'v mm mm. 11 F A 1.1 1.1 u g A LL ° -_‘ m o 11 H a o , H" .5' E F . v ('UI vsc'o) lulu s 700900007

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 5

5 Dimensions

Figure 1 Dimensions

Document changes

7009_00 First version

7009_01 Technical data modified and module marking updated

7009_02 Fiber optic technical data and alarm contact wiring modified

7009_03 Approvals added

7009_04 Port numbering and rail adapter added

7009_05 ST versions added

7009_06 Values for humidity changed, approval added

3087_A Changed document number

LNK/ACT

100

LNK/ACT

100

US1 US2

FL SWITCH SF 8TX

Ord.-No.: 2832771

US1 US2

FL SWITCH SF 14TX/2FX

Ord.-No.: 2832593

LNK/ACT

100

LNK/ACT

100

LNK/ACT

100

LNK/ACT

100

LNK/ACT

X11

X13

X15

X10

X12

X14

X16

X17

_\ maﬁﬁ _\

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 6

6 Housing versions and position of the fiber optic connections

The housings of the 8-port versions are identical. On the fiber optic versions, the connections for the fiber optic ports are at

the bottom (see also Figure 3).

Figure 2 Housing examples for 8-port switches - FL SWITCH SF 8TX (left)/FL SWITCH 7TX/FX ST (right)

The housings of the 16-port versions are identical. On the fiber optic versions, the connections for the fiber optic ports are at

the bottom.

Figure 3 Housing example for 16-port switches (FL SWITCH 14TX/2FX)

LNK/ACT

100

LNK/ACT

100

US1 US2

FL SWITCH SF 8TX

Ord.-No.: 2832771

US1 GND US2 GND R1 R2 NC

700901000

LNK/ACT

100

US1 US2

US1 GND US2 GND R1 R2 NC

LNK/ACT

100

FL SWITCH SF 7TX/FX ST

Ord. No.2832577

LNK/ACT

100

TD RD

LNK/ACT

100

LNK/ACT

100

LNK/ACT

100

US1 US2

FL SWITCH SF 14TX/2FX

Ord.-No.: 2832593

LNK/ACT

100

LNK/ACT

100

LNK/ACT

100

LNK/ACT

100

LNK/ACT

X11

X13

X15

X10

X12

X14

X16

X17

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 7

7 Local diagnostic and status indicators

8 General information 9 Installation

Install the FL SWITCH SF… module on a clean DIN rail. To

avoid contact resistance only use clean, corrosion-free DIN

rails. End clamps can be mounted on both sides of the

module to stop the modules from slipping on the DIN rail.

9.1 Mounting

1. Place the module onto the DIN rail from above. The

upper holding keyway of the module must be hooked

onto the top edge of the DIN rail.

2. Push the module from the front towards the mounting

surface.

3. Once the module is snapped on properly, check that it

is fixed securely on the DIN rail.

9.2 Removal

1. Insert a suitable tool (e.g., needle-nose pliers) into the

arresting latch and pull it down.

2. Pull the module slightly away from the mounting

surface.

3. Lift the module from the DIN rail.

Des. Color Status Meaning

US1 Green On Supply voltage US1 in the tolerance zone

Off Supply voltage US1 too low

US2 Green On Supply voltage US2 in the tolerance zone

Off Supply voltage US2 too low

One LED per port

LNK/ACT Green On Link active

Flashing Active telegram

Off Link not active

100 Yellow On Data transmission speed 100 Mbps

Off Data transmission speed not 100 Mbps

CAUTION:

Disregarding this warning may result in damage

to equipment and/or serious personal injury. Only

qualified personnel may start up and operate this

device. According to the safety instructions in this

text, qualified personnel are persons who are

authorized to start up, to ground, and to mark

devices, systems, and equipment according to

the standards of safety technology. In addition,

these persons must be familiar with all warning

instructions and maintenance measures in this

text.

NOTE:

The FL SWITCH SF… module is designed

exclusively for SELV operation according to

IEC 950 / EN 60950 / VDE 0805.

WARNING: EXPLOSION HAZARD

– This equipment is suitable for use in Class I,

Zone 2, Groups A,B,C, and D or non-

hazardous locations only.

– Substitution of components may impair

suitability for Class I, Zone 2.

– Do not disconnect equipment unless power

has been switched off or the area is known to

be non-hazardous.

Connect the DIN rail to protective earth ground

using a grounding terminal block. The modules

are grounded when snapped onto the DIN rail.

Connect protective earth ground with low

impedance.

um m uszauu m M 4: >4: / 1234561af wmmmmmgm/ )12345378 / ~ \

FL SWITCH SF…

3087_en_A PHOENIX CONTACT 8

9.3 Terminal assignment

Figure 4 Terminal assignment

9.4 Connecting the supply voltage

Figure 5 Typical supply of the module from one or two

voltage sources

Supplying the module from one voltage source

Terminal Meaning

1Supply voltage +US1

2GND US1

3 Supply voltage +US2

4GND US2

5 Alarm contact 1 (R1)

6 Alarm contact 2 (R2)

7 Functional earth ground

8Not connected

U S 1 G N D G N DU S 2 R 1 R 2 N C

1 2 3 4 5 6 7 8

700900005

The module is operated using a +24 V DC SELV.

The module is fully operational even with only one

supply voltage (without jumpering it to other

supply voltage terminal blocks) and/or without

wiring the alarm contact.

The alarm contact is open if voltage is present at

both supply voltage terminal blocks US1 and

US2. In the event of an error at one of the two

voltage sources, the contact is closed.

If the voltage is not supplied redundantly, terminal

blocks US1 and US2 must be jumpered (see

Figure 4, version 1), so that the voltage can be

monitored via the alarm contact.

Option: In addition, noise immunity can be

increased in environments subject to high EMI by

a low-impedance connection to functional earth

ground via terminal block 7.

FL SWITCH SF…

3087_en_A 9

PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany

www.phoenixcontact.com

9.5 Ethernet interface

The FL SWITCH SF… module has up to sixteen Ethernet

ports on the front in RJ45 format, to which only twisted pair

cables with an impedance of 100  can be connected. The

data transmission speed is 10 Mbps or 100 Mbps. In

addition, each port has an auto crossing function: It is not

necessary to make a distinction between 1:1 or crossover

Ethernet cables.

Figure 6 Pin assignment of the Ethernet ports in RJ45

format

9.6 Switching features of the FL SWITCH SF…

Store and forward

All data telegrams received by the switch are stored and

checked for validity. Invalid or faulty data packets

(> 1522 bytes or CRC errors) and fragments (< 64 bytes)

are rejected. Valid data telegrams are forwarded by the

switch. The switch always forwards the data using the data

transmission speed used in the target network segment.

Multi-address function

The switch automatically learns the addresses of

termination devices, which are connected via the port, by

evaluating the source addresses in the data telegrams. Only

packets with unknown addresses, with a source address of

this port or with a multicast/broadcast address in the target

address field are forwarded via the corresponding port. The

switch can store up to 2k (8-port version) or 8k (16-port

version) addresses in its address table with an aging time of

five minutes. This is important when more than one

termination device is connected to one or more ports. In this

way, several independent subnetworks can be connected

to one switch.

10 Mounting option

Using the FL RA SF8 rail adapter the 8-port SF switches can

also be mounted on the DIN rail at an angle of 90°. In

addition, the switch can be fixed on the DIN rail using the

E/NS 35 universal end clamp.

Figure 7 FL SWITCH SF 8TX rotated 90° and DIN rail-

mounted

A restart deletes the entire address table.

P i n 1

P i n 2

P i n 3

P i n 4

P i n 5

P i n 6

P i n 7

P i n 8

R D +

R D -

T D +

T D -

n . c .

R J 4 5

LNK/ACT

100

LNK/ACT

100

US1 US2

FL SWITCH SF 8TX

Ord.-No.: 2832771

Products related to this Datasheet

NETWORK SWITCH-UNMANAGED 8 PORT

2832771

NETWORK SWITCH-UNMANAGED 16 PORT

2832849